Ryzen 5 5600X + RTX 5070 in Kingdom Come: Deliverance II

Every figure below is a measurement aggregated from published review charts — the CPU's frame-rate ceiling and the frame rate the GPU delivers in this game, combined. The CPU figure is the highest frame rate that CPU sustained in this game with a flagship GPU installed — past that frame rate, the CPU is the limit. Settings: Ultra preset, upscaling disabled. CPU ceiling measured at 1080p, highest settings (TechPowerUp CPU suite), RTX 5090; Ryzen 5 5600X from Gamers Nexus at its Medium CPU-isolation preset.

1080p145–145 fps · Mild GPU limit 1440p102–102 fps · Strong GPU limit 4K53–53 fps · Strong GPU limit

1080p

Mild GPU limit

Expected frame rate: 145–145 fps (measured range across sources).

CPU Ryzen 5 5600Xceiling ~172 fps on its own

GPU RTX 5070delivers ~145 fps in this game at 1080p

The GPU side is lower by about 15.7% in this game at 1080p. The math, from the two measured figures above: the pair runs at the lower one (~145 fps), and the gap to the faster side is (172 − 145) ÷ 172 ≈ 15.7% of the faster side's output. That percentage belongs to this game, this resolution and these settings only — the same two parts score differently in another game, which is why no universal bottleneck percentage exists for a pair of parts. Upgrading the faster part alone would not raise the frame rate.

That range justifies a 144 Hz monitor in this game.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

1440p

Strong GPU limit

Expected frame rate: 102–102 fps (measured range across sources).

CPU Ryzen 5 5600Xceiling ~172 fps on its own

GPU RTX 5070delivers ~102 fps in this game at 1440p

The GPU side is lower by about 40.9% in this game at 1440p. The math, from the two measured figures above: the pair runs at the lower one (~102 fps), and the gap to the faster side is (172 − 102) ÷ 172 ≈ 40.9% of the faster side's output. That percentage belongs to this game, this resolution and these settings only — the same two parts score differently in another game, which is why no universal bottleneck percentage exists for a pair of parts. Upgrading the faster part alone would not raise the frame rate.

That range suits a 60 Hz monitor; a high-refresh panel would be underused in this game.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

4K

Strong GPU limit

Expected frame rate: 53–53 fps (measured range across sources).

CPU Ryzen 5 5600Xceiling ~172 fps on its own

GPU RTX 5070delivers ~53 fps in this game at 4K

The GPU side is lower by about 69.0% in this game at 4K. The math, from the two measured figures above: the pair runs at the lower one (~53 fps), and the gap to the faster side is (172 − 53) ÷ 172 ≈ 69.0% of the faster side's output. That percentage belongs to this game, this resolution and these settings only — the same two parts score differently in another game, which is why no universal bottleneck percentage exists for a pair of parts. Upgrading the faster part alone would not raise the frame rate.

That range sits under a smooth 60 in this game at the tested preset — expect to trade settings for frame rate.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

GPUs measured in this game at 1440p that clear this CPU:

RTX 5090 — delivers ~186 fps (smallest step that removes the limit) · full result

This pair in other games

Alan Wake 2 — only your GPU has a figure there so far.
Baldur's Gate 3 — Strong CPU limit, 82–82 fps at 1440p
Counter-Strike 2 — Balanced, 290–290 fps at 1440p
Cyberpunk 2077 — Mild GPU limit, 89–89 fps at 1440p
Elden Ring — only your GPU has a figure there so far.
Marvel's Spider-Man 2 — Mild GPU limit, 99–99 fps at 1440p
S.T.A.L.K.E.R. 2 — only your GPU has a figure there so far.
Starfield — Balanced, 77–77 fps at 1440p

Sources for Kingdom Come: Deliverance II

Full data: Kingdom Come: Deliverance II benchmarks · how verdicts are computed.