Core Ultra 7 265K + RTX 5090 in Kingdom Come: Deliverance II

Every figure below is a measurement aggregated from published review charts — the CPU's frame-rate ceiling and the GPU's frame-rate ceiling in this game, combined. Settings: Ultra preset, upscaling disabled. CPU ceiling measured at 1080p, highest settings (TechPowerUp CPU suite), RTX 5090.

1080p175–175 fps · Mild CPU limit1440p175–175 fps · Balanced pairing4K116–116 fps · Strong GPU limit

1080p

Mild CPU limit

Expected frame rate: 175–175 fps (measured range across sources).

CPU Core Ultra 7 265Kceiling ~175 fps on its own
GPU RTX 5090ceiling ~225 fps on its own

The CPU side is lower by about 22.3%: the pair runs at the lower ceiling, and upgrading the other part alone would not raise it.

That range feeds a 165 Hz or faster monitor — this is high-refresh territory in this game.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

1440p

Balanced pairing

Expected frame rate: 175–175 fps (measured range across sources).

CPU Core Ultra 7 265Kceiling ~175 fps on its own
GPU RTX 5090ceiling ~186 fps on its own

The two measured ceilings sit within 5.8% of each other — neither part wastes much of the other.

That range feeds a 165 Hz or faster monitor — this is high-refresh territory in this game.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

4K

Strong GPU limit

Expected frame rate: 116–116 fps (measured range across sources).

CPU Core Ultra 7 265Kceiling ~175 fps on its own
GPU RTX 5090ceiling ~116 fps on its own

The GPU side is lower by about 33.4%: the pair runs at the lower ceiling, and upgrading the other part alone would not raise it.

That range justifies a 144 Hz monitor in this game.

Confidence: MEDIUM — based on 2 source measurements for these two parts.

This pair in other measured games

Sources for Kingdom Come: Deliverance II

Full data: Kingdom Come: Deliverance II benchmarks · how verdicts are computed.